Warning: Javascript must be enabled to use all the features on this page!

Page Loading - Please Wait...

Click to hideNews Bulletins
  • Due to a lapse in appropriations, the majority of USGS websites may not be up to date and may not reflect current conditions. Websites displaying real-time data, such as Earthquake and Water and information needed for public health and safety will be updated with limited support. Additionally, USGS will not be able to respond to inquiries until appropriations are enacted. For more information, please see www.doi.gov/shutdown.

  • Please see news on new formats
  • Full News RSS icon

USGS 01397000 South Branch Raritan River at Stanton NJ


Click to hidestation-specific text
Funding for this site is provided by:



LOCATION.--Lat 40°34'20", long 74°52'05" referenced to North American Datum of 1983, Franklin Township, Hunterdon County, NJ, Hydrologic Unit 02030105, on right bank at downstream side of bridge on Stanton Station Road at Stanton Station, 0.4 mi upstream from Prescott Brook, and 1.4 mi west of Stanton.
DRAINAGE AREA.--147 mi2.
PERIOD OF RECORD.--Continuous-record discharge station July 1903 to December 1906, September 1925 to current year. Monthly discharge only for July 1919 to August 1925.
REVISED RECORDS.--WSP 561: Drainage area. WSP 1552: 1904, 1922-24(M), 1928-29(M), 1933-35(M). WDR NJ-88-1: 1982. WDR NJ-02-1: 2002(m).
GAGE.--Water-stage recorder with telemetry. Datum of gage is 125.01 ft above NGVD of 1929. Prior to Aug 17, 1925, non-recording gage on downstream side of highway bridge at same site and datum.
REMARKS.--Records good, except for estimated discharges, which are fair. Flow regulated by Spruce Run Reservoir since September 1963 (station 01396790). Occasional regulation at low flows by ponds above station. Water diverted by Hamden Pumping Station, 4.0 mi upstream, into Round Valley Reservoir since February 1966. Water can be released (maximum rate 186 ft3/s) from Round Valley Reservoir at Hamden Pumping Station since July 1990. Discharges above 9,300 ft3/s from rating curve extension on basis of slope-area measurement and contracted opening measurement
EXTREMES FOR PERIOD OF RECORD.--Maximum discharge, 18,000 ft3/s, Aug 19, 1955, gage height, 15.22 ft, from rating curve extended above 9,300 ft3/s on basis of slope-area measurement and contracted opening measurement at gage height 15.22 ft; minimum discharge, 9.0 ft3/s, Nov 7, 1931.


PERIOD OF RECORD.--Water years 1923-25, 1959-81, 1983-84, 1991-97, 2004 to current year.
DISSOLVED OXYGEN, PERCENT SATURATION: September 2009. PH: September 2009. SPECIFIC CONDUCTANCE: September 2009. WATER TEMPERATURE: September 2009.
COOPERATION.--COOPERATION: Physical measurements and samples for laboratory analysis were collected in cooperation with the NJ Department of Environmental Protection and the New Jersey Water Supply Authority. Determination of concentrations of ammonia in filtered water was performed by the NJ Department of Health and Senior Services, Environmental and Chemical Laboratory (DHSS-ECL). Determination of concentrations of suspended solids in unfiltered water was performed by the DHSS-ECL.
REMARKS.--Discrete water-quality data were collected as part of the New Jersey Ambient Surface-Water-Quality Monitoring Network.

Peak Flood Chart

Gage Photo

National Weather Service flood stage for this gage is 8.0 ft.

Forecasts for this gage are issued by the National Weather Service routinely year-round.
Forecast information is available here.

This station managed by the New Jersey Water Science Center.

Available Parameters Period of Record
All 2 Available Parameters for this site
00010 Temperature, water(Max.,Min.,Mean,Ins.) 1959-12-11  2009-09-21
00060 Discharge(Mean) 1903-10-01  2019-01-17

Graph w/ stats
Graph w/ meas
Graph w/ (up to 3) parms
Days  (59)

  -- or --
Begin date

End date

Summary of all available data for this site
Instantaneous-data availability statement

Zoom period plot
y axis labels

Period selected plot

Enable tooltip
Enable approval and provisional periods
Enable Qualification Code periods
Enable Status Code periods
Enable Reference levels
Tip: To reset zoom period to period selected, double left-click in the "Period selected" plot.
Tip: To zoom to a shorter period, left-click and drag over the period of interest in either graph.