Warning: Javascript must be enabled to use all the features on this page!


Page Loading - Please Wait...

Click to hideNews Bulletins

Water-Year Summary for Site 433243092260606

Click to hide Water-Year Summary instructions and information
  • Water-Year Summary reports summarize a year of hydrologic data in a printer-friendly format.
  • For water years 2014 onward, choose a water year and parameter and an on-demand Water-Year Summary report will be generated.
  • For water years 2006 through 2013, choose a water year and an Annual Water Data Report will be provided.
  • For water years 2005 and earlier, Annual Water Data Reports may be available in digital format.
  • Not all sites have reports available for every water year.
Available Parameters
00010 Temperature, water(Mean)  
62611 Elevation, GW, NAVD88(Mean)  
72019 Water level, depth LSD(Max.,Mean,Med.,Min.)  

Water year 2025: 2025-10-01 to 2026-09-30
 
Print this page
USGS Water-Year Summary 2025
433243092260606 STR2-5 South Drained Site Transect 2
Sand and gravel aquifers (glaciated regions)
Pleistocene Series
LOCATION - Lat 43°32'43.37", long 92°26'06.82" referenced to North American Datum of 1983, in SW 1/4 SE 1/4 sec.18, T.101 N., R.13 W., Fillmore County, MN, Hydrologic Unit 07060002, The piezometer is located approximately 4.25 miles NE of LeRoy, MN. The piezometer is located approximately 0.4 miles northwest of the intersection of 130th street and County Rd. 109 (111th Ave).
GROUNDWATER RECORDS
WELL CHARACTERISTICS - Depth 9.98 ft. Upper casing diameter 1.59 in; top of first opening 4.93 ft, bottom of last opening 9.41 ft. Piezometer STR2-5 was installed using several sections of 3.25-inch-diameter Geoprobe rods to a depth of 10.0 feet. The piezometer is constructed of a 4.48-feet-long, 1.5-inch-diameter, schedule-40 PVC, 0.010-inch slotted Hole Products Inc. well screen, flush threaded to length/s of 5.00 feet of 1.5-inch-diameter, schedule-40 PVC well casing. The piezometer casing measuring point (stickup) was 2.03 feet (1287.09 ft. NAVD88, +/- 0.02 ft.) above land surface when measured on 17 November 2016. The open interval of the piezometer is between 4.93 and 9.41 feet below land surface and the total well depth is 9.98 feet below land surface.

This piezometer is screened in glacial till/clay sediment, which is overlies bedrock.
DATUM - Land-surface datum is 1,285.06 ft above North American Vertical Datum of 1988. Measuring point: Black mark on top of 1.59-inch diameter PVC well casing, 2.03 ft above land-surface datum, Nov. 17, 2016 to present. The measuring point is a black mark on the top of the white PVC 1.59-inch diameter well casing, which was 2.03 feet above land surface on 17 November 2016. Elevation of the measuring point is 1287.09 plus-or-minus 0.02 feet above sea level, North American Vertical Datum of 1988, based on differential GPS survey on 27 March 2017.
PERIOD OF RECORD -

Water levels were recorded periodically from 27 February 2017 to 31 October 2018. Water levels were recorded quarter-hourly from 02 March 2017 at 12:15 CST to 31 October 2018 at 12:15 CDT, except during the following periods:

02 Mar. 2017 at 09:00 CST - 18 May 2017 at 20:00 CDT: due to WL recovering back to static after pumping dry on 27 Feb. 2017.

11 Jan. 2018 at 04:30 CST to 17 Jan. 2018 at 18:00 CST: due to transducer recording inaccurate data, which was deleted from record.

20 Feb. 2018 at 06:00 CST to 20 Feb. 2018 at 20:45 CST: due to transducer recording inaccurate data, which was deleted from record.

23 Feb. 2018 at 00:15 CST to 24 Feb. 2018 at 13:45 CST: due to transducer recording inaccurate data, which was deleted from record.

14 Apr. 2018 at 012:45 CDT to 16 Apr. 2018 at 08:30 CDT: due to transducer recording inaccurate data, which was deleted from record.

01 Oct. 2018 at 14:15 CDT to 02 Oct. 2018 at 01:30 CST: due to transducer recording inaccurate data, which was deleted from record.

GAGE -

Continuous water level and water temperature were measured with a new Solinst Model 3001 Levelogger non-vented pressure transducer from 02 March 2017 at 12:15 CST to 31 October 2018 at 12:15 CDT. These data were recorded quarter-hourly by the Solinst Model 3001 Levelogger pressure transducer, which had an internal data logger built into it. The data logger was housed inside the 1.5-inch PVC well casing. The piezometer has a slip-on PVC cap and no pad lock. The gage was powered by an internal pressure transducer battery. A Solinst Model 3001 Barologger Edge atmospheric barometer was installed (hanging) in nearby piezometer STR2-3A. These barometric pressure data were used to post-process/correct the non-vented pressure transducer data. Data were downloaded manually and no telemetry or phone line was wired into the gage.

The pressure transducer and data logger were removed from the well on 31 Oct. 2018 at 12:15 CDT. Data collection for the Impacts on Drainage Recharge study have concluded and all data logging equipment have been removed from the site.

COOPERATION - This site was operated (2016-2018) by the U.S. Geological Survey as a monitoring piezometer for the Southeast Minnesota Subsurface Drainage Impacts on Groundwater Recharge study. The piezometer began to be used as part of the Southeast Minnesota Subsurface Drainage Impacts on Groundwater Recharge study during 17 Nov. 2016 to 31 Oct. 2018. The GW Drainage Recharge study is a collaborative effort between the Environment and Natural Resources Trust Fund (via Legislative-Citizen Commission on Minnesota Resources (LCCMR)) and the U.S. Geological Survey.
REMARKS - Continuous water levels are measured with a sealed (non-vented) pressure transducer. Transducer water-levels are compensated for barometric-pressure variations the record of a nearby barometric-pressure sensor located at site STR2-3A. The water-level record is linearly corrected to calibration water levels twice per year (Spring & Fall). Calibration water levels are measured with electric or steel tapes that are themselves calibrated about every 3 years.

Water levels below land surface appear accurate to about ±0.10 feet during 02 March 2017 to 31 October 2018 based on short-term water-level variability and calibration corrections of the water level record. Sequential water-level differences are accurate to ±0.01 feet based on manufacture specifications. However, the entire water-level record contains cyclic artifacts of the barometric pressure that remain after raw water levels from the unvented pressure transducer are corrected with the barometric pressure record.  These artifacts, which are not real water level changes, are circum-daily in period and have an amplitude of about 0.02 to 0.05 feet.  Additionally, the water-level record is biased depending on where in the barometric-artifact cycle calibration corrections are made.  The direction of this bias is unknown, but the amount is less than or equal to the amplitude that of the artifact cycle.

Water elevation above North American Vertical Datum of 1988 (sea level) is calculated by subtracting water level (below land-surface datum) from land-surface elevation. Land-surface elevation is accurate to plus-or-minus 0.02 feet based on a differential GPS survey on 27 March 2017.  Water elevation accuracy is the sum of the water level (below land-surface datum) and land-surface elevation accuracy, or about ±0.12 feet.
 
WATER-QUALITY RECORDS
WELL CHARACTERISTICS - Depth 9.98 ft. Upper casing diameter 1.59 in; top of first opening 4.93 ft, bottom of last opening 9.41 ft. Piezometer STR2-5 was installed using several sections of 3.25-inch-diameter Geoprobe rods to a depth of 10.0 feet. The piezometer is constructed of a 4.48-feet-long, 1.5-inch-diameter, schedule-40 PVC, 0.010-inch slotted Hole Products Inc. well screen, flush threaded to length/s of 5.00 feet of 1.5-inch-diameter, schedule-40 PVC well casing. The piezometer casing measuring point (stickup) was 2.03 feet (1287.09 ft. NAVD88, +/- 0.02 ft.) above land surface when measured on 17 November 2016. The open interval of the piezometer is between 4.93 and 9.41 feet below land surface and the total well depth is 9.98 feet below land surface.

This piezometer is screened in glacial till/clay sediment, which is overlies bedrock.
DATUM - Land-surface datum is 1,285.06 ft above North American Vertical Datum of 1988. Measuring point: Black mark on top of 1.59-inch diameter PVC well casing, 2.03 ft above land-surface datum, Nov. 17, 2016 to present. The measuring point is a black mark on the top of the white PVC 1.59-inch diameter well casing, which was 2.03 feet above land surface on 17 November 2016. Elevation of the measuring point is 1287.09 plus-or-minus 0.02 feet above sea level, North American Vertical Datum of 1988, based on differential GPS survey on 27 March 2017.
PERIOD OF RECORD - Water temperatures were recorded quarter-hourly from 02 March 2017 at 12:15 CST to 31 October 2018 at 12:15 CDT.
COOPERATION - This site was operated (2016-2018) by the U.S. Geological Survey as a monitoring piezometer for the Southeast Minnesota Subsurface Drainage Impacts on Groundwater Recharge study. The piezometer began to be used as part of the Southeast Minnesota Subsurface Drainage Impacts on Groundwater Recharge study during 17 Nov. 2016 to 31 Oct. 2018. The GW Drainage Recharge study is a collaborative effort between the Environment and Natural Resources Trust Fund (via Legislative-Citizen Commission on Minnesota Resources (LCCMR)) and the U.S. Geological Survey.
INSTRUMENTATION - Water temperature are measured with an Solinst Levelogger 3001 submersible pressure transducer accurate to +/- 0.1°C. Temperature differences are accurate to 0.1°C.