Warning: Javascript must be enabled to use all the features on this page!


Page Loading - Please Wait...

Click to hideNews Bulletins
Click to hide state-specific text

[!] Over the next year, the USGS Pennsylvania Water Science Center will be updating the geodetic vertical elevation (gage datum) for many locations. Click HERE for additional information including a current list of streamgages with upcoming datum changes. This update in gage datum does not affect the location of the streamgage, nor the observed local gage height or discharge recorded at the streamgage.

USGS 01429301 Dyberry Creek at Tanners Falls near Dyberry, PA

PROVISIONAL DATA SUBJECT TO REVISION

Click to hidestation-specific text
Funding for this site is provided by:

 


STATION.--01429301 Dyberry Creek at Tanners Falls near Dyberry, PA
LOCATION.--Lat 41`39'11.12", long 75`16'55.39", Wayne County, Hydrologic Unit 02040103, at bridge on Dug Rd (SR 4009), 450 ft south of intersection with SR 4007 and about 3 miles upstream of Jadwin reservoir.
DRAINAGE AREA.--46.4 square miles.
PERIOD OF RECORD.--October 2018 to current year.
GAGE.--Water-stage recorder, non-contact stage sensor and crest-stage gage. Datum of gage is 1,013.0 ft above North American Vertical Datum of 1988, from GPS survey. Satellite telemetry at station.
COOPERATION.--Station established and maintained by the U.S. Geological Survey. Funding for the operation of this station is provided by the U.S. Army Corps of Engineers, Philadelphia District.
REMARKS.--Computed discharge below 50 cfs and above 400 cfs are considered poor due to lack of measurements. Ratings are being developed and may change substantially after review and additional measurements are made.
This station managed by the PAWSC Williamsport Field Office.

Available Parameters Period of Record
  
2018-10-24  2024-04-18







 (365)
 
  -- or --

 

 
Summary of all available data for this site
Instantaneous-data availability statement

Discharge, cubic feet per second

Graph of DAILY Discharge, cubic feet per second

Add up to 2 more sites and replot for "Discharge, cubic feet per second"

?
 
Note



Create presentation-quality graph.