USGS Current Water Data for Wyoming

USGS Home
Contact USGS
Search USGS

National Water Information System: Web Interface

USGS Water Resources

Data Category:
Geographic Area:

Warning: Javascript must be enabled to use all the features on this page!

Click to hideNews Bulletins

USGS Current Water Data for Wyoming

Click to hide state-specific text

Questions or concerns about USGS streamflow data in Wyoming and Montana can be directed to Kirk Miller (kmiller@usgs.gov; 307-775-9168).

UPDATED August 8, 2019: USGS streamflow monitoring will be discontinued at the following site effective October 1, 2019:

09219200 Blacks Fork above Smiths Fork, near Lyman, WY (2018 to present)

USGS monitoring activities at this site are funded by a partner agency. Lack of partner funding for this site will result in discontinuation of all monitoring activities. Questions or concerns can be directed to Kirk Miller (kmiller@usgs.gov; 307-775-9168).

Daily Streamflow Conditions

Select a site to retrieve data and station information.
Stream gage levels in Wyoming, relative to 30 year average.

Explanation
	High
	> 90th percentile
	76th - 90th percentile
	25th - 75th percentile
	10th - 24th percentile
	< 10th percentile
	Low
	Not ranked

The colored dots on this map depict streamflow conditions as a percentile, which is computed from the period of record for the current day of the year. Only stations with at least 30 years of record are used.

The gray circles indicate other stations that were not ranked in percentiles either because they have fewer than 30 years of record or because they report parameters other than streamflow. Some stations, for example, measure stage only.

Go to the

Current Streamflow Conditions Table

Current conditions data typically are recorded at 15-60 minute intervals, stored onsite, and then transmitted to USGS offices in Wyoming every hour. Recording and transmission times may be more frequent during critical events. Data from current conditions sites are relayed to via satellite and are available for viewing within minutes of arrival.

All real-time data are provisional and subject to revision.

Build Current Conditions Table	Show a custom current conditions summary table for one or more stations.
Build Time Series	Show custom graphs or tables for a series of recent data for one or more stations.