USGS Current Water Data for New Hampshire

USGS Home
Contact USGS
Search USGS

National Water Information System: Web Interface

USGS Water Resources

Data Category:
Geographic Area:

Warning: Javascript must be enabled to use all the features on this page!

Click to hideNews Bulletins

Explore the NEW USGS National Water Dashboard interactive map to access real-time water data from over 13,500 stations nationwide.

USGS Current Water Data for New Hampshire

Click to hide state-specific text

To view real-time groundwater levels in New Hampshire. click here

This page will be decommissioned in early 2026 and will redirect to WDFN. Learn more about our modernization plans and timeline.

Daily Streamflow Conditions

Select a site to retrieve data and station information.
Stream gage levels in New Hampshire, relative to 30 year average.

Explanation
	High
	> 90th percentile
	76th - 90th percentile
	25th - 75th percentile
	10th - 24th percentile
	< 10th percentile
	Low
	Not ranked

The colored dots on this map depict streamflow conditions as a percentile, which is computed from the period of record for the current day of the year. Only stations with at least 30 years of record are used.

The gray circles indicate other stations that were not ranked in percentiles either because they have fewer than 30 years of record or because they report parameters other than streamflow. Some stations, for example, measure stage only.

Statewide Streamflow Real-Time Table

Real-time data typically are recorded at 15- to 60-minute intervals, stored onsite, and then transmitted to USGS offices every 1 to 4 hours, depending on the data relay technique used. Recording and transmission times may be more frequent during critical events. Data from real-time sites are relayed to USGS offices via satellite, telephone, and/or radio telemetry and are available for viewing within minutes of arrival.

All real-time data are provisional and subject to revision.

Build Real-Time Table	Show a custom real-time summary table for one or more stations.
Build Time Series	Show custom graphs or tables for a series of recent data for one or more stations.